ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual
Page 231
Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
231
https <socket-number>
Allows HTTPS access on the
specified service port.
13
icmp
Allows ICMP access for
services like Ping.
13
snmp
Allows SNMP management.
13
ssh <socket-number>
Allows SSH access on the
specified service port.
13
telnet <socket-number>
Allows Telnet access on the
specified service port.
13
snmp-server
[contact <system
contact>] [location
<system location>]
Sets the geographic location
and the name of the person in
charge of this switch.
13
get-community
<property>
Sets the get community.
13
set-community
<property>
Sets the set community.
13
trap-community
<property>
Sets the trap community.
13
trap-destination <ip>
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
13
spanning-tree
Enables STP on the switch.
13
<port-list>
Enables STP on a specified
port.
13
<port-list> path-cost
<1-65535>
Sets the STP path cost for a
specified port.
13
<port-list> priority
<0-255>
Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
Sets Hello Time, Maximum
Age and Forward Delay.
13
help
Displays command help
information.
13
priority <0-61440>
Sets the bridge priority of the
switch.
13
spq
Sets the switch to use Strictly
Priority Queuing (SPQ).
13
ssh known-hosts
<host-ip>
<1024|ssh-rsa|ssh-dsa>
<key>
Adds a remote host to which
the switch can access using
SSH service.
13
storm-control
Enables broadcast storm
control on the switch.
13
syslog
Enables syslog logging.
13
server <ip-adderss>
inactive
Disables syslog logging to the
specified syslog server.
13
level <0 ~ 7>
Sets the IP address of the
syslog server and the severity
level.
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
P