ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 128)

Chapter 18 Classifier
VES-1616F-3x Series User’s Guide
128
Figure 50 Classifier
The following table describes the related labels in this screen.
Table 40 Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 untagged,
Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3
standards.
A value of Ethernet II indicates that the packets are formatted according to RFC 894,
Ethernet II encapsulation.
Layer 2
Specify the fields below to configure a layer-2 classifier.
VLAN Select Any to classify traffic from any VLAN or select the second option and specify
the source VLAN ID in the field provided.