ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual
Page 229
Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
229
<profile-name>
physide <1|2>
frequence <0 -
30000>
Removes the specified
breakpoint in a VDSL PSD
profile.
13
vlan
<vlan-id>
Deletes the static VLAN entry.
13
vlan1q
gvrp
Disables GVRP on the switch.
13
port-isolation
Disables port isolation.
13
vlan-stacking
Disables VLAN stacking.
13
wfq fe-spq
Disables Strict Priority
Queuing on the fast Ethernet
(10/100Mbps) ports.
13
password
<password>
Change the password for
Enable mode.
14
policy
<name> classifier
<classifier-list>
<[ vlan<vlan-id> ]
[ egress-port <port-
num> ][ priority <0-7>
][ dscp <0-63>] [tos
<0-7> ][bandwidth
<bandwidth>][ egress-
mask<port-list>]
[outgoing-packet-
format
<tagged|untagged>]
[out-of-profile-dscp
<0-63>][forward-action
<drop|forward|egressma
sk>][queue-action
<prio-set|prio-
queue|prio-replace-
tos> ][diffserv-action
<diff-set-tos|diff-
replace-priority|diff-
set-dscp>][outgoing-
mirror][outgoing-
eport][outgoing-non-
unicast-eport]
[outgoing-set-
vlan][metering][out-
of-profile-action<[
change-dscp][drop][
forward][set-drop-
prec][inactive]>
Configures a policy.
A
classifier distinguishes traffic
into flows based on the
configured criteria. A policy
rule ensures that a traffic flow
gets the requested treatment
in the network.
13
help
Displays command
information.
13
port-access-
authenticator
Enables 802.1x authentication
on the switch.
13
<port-list>
Enables 802.1x authentication
on the specified port(s).
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
P