ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 235)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
235
no bandwidth-limit Disables bandwidth limit on the
port(s).
13
broadcast-limit Disables broadcast storm control limit
on the port(s).
13
diffserv Disables DiffServ settings on the
port(s).
13
dlf-limit Disables destination lookup failure
(DLF) on the switch.
13
egress set <port-
list>
Sets the outgoing traffic port list for a
port-based VLAN.
13
flow-control Disables flow control on the port(s). 13
gvrp Disable GVRP on the port(s). 13
igmp-filtering
profile
Disables IGMP filtering. 13
igmp-group-limit Disables IGMP group limitation. 13
igmp-immediate-
leave
Disables the IGMP immediate leave
function.
13
inactive Enables the port(s) on the switch. 13
ingress-check Disables ingress checking on the
port(s).
13
intrusion-lock Disables intrusion-lock on a port so
that a port can be connected again
after you disconnected the cable.
13
mirror Disables port mirroring on the port(s). 13
multicast-limit Disables multicast limit on the port(s). 13
protocol-based-vlan
ethernet-type
<ethe>
Disables protocol based VLAN of the
specified protocol on the port(s).
13
protocol-based-vlan
packet-format
<pack> ethernet-
type <ethernet-
type>
Disables protocol based VLAN of the
specified packet format on the port.(s)
13
vlan-trunking Disables VLAN trunking on the port(s). 13
protocol-
based-vlan
name <name>
ethernet-type
<ethernet-type>
vlan <vid>
Creates a protocol based VLAN with
the protocol type and VLAN ID.
13
ethernet-type
<ethernet-type>
vlan <vid> inactive
Disables the protocol based VLAN. 13
packet-format
<packet-format>
ethernet-type
<ethernet-type>
vlan <vid> priority
<0-7>
Creates a protocol based VLAN with
the packet format, VLAN ID and
priority.
13
Table 82 interface port-channel Commands (continued)
COMMAND DESCRIPTION P