ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 49)

Chapter 4 The Web Configurator
VES-1616F-3x Series User’s Guide
49
VDSL Alarm
Profile Setup
This link takes you to a screen where you can configure VDSL alarm profiles to
apply to the VDSL lines.
VDSL PSD
Profile Setup
This link takes you to a screen where you can configure VDSL PSD profiles to
apply to the VDSL lines.
Advanced Application
VLAN This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup screen).
Static MAC
Forwarding
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol
This link takes you to screens where you can configure the STP/RSTP to prevent
network loops.
Bandwidth
Control
This link takes you to screens where you can cap the maximum bandwidth allowed
from specified source(s) to specified destination(s).
Broadcast Storm
Control
This link takes you to a screen to set up broadcast filters.
Mirroring This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
form one logical, higher-bandwidth link.
Port
Authentication
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
Port Security This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port.
Queuing Method This link takes you to a screen where you can configure SPQ or WFQ with
associated queue weights for each port.
Classifier This link takes you to a screen where you can configure the switch to group
packets based on the specified criteria.
Policy Rule This link takes you to a screen where you can define actions on classified traffic
flows.
VLAN Stacking This link takes you to a screen where you can configure VLAN stacking.
Multicast This link takes you to screens where you can configure multicast functions (such as
IGMP) on the switch.
MVR This link takes you to screens where you can configure MVR (Multicast VLAN
Registration).
DiffServ This link takes you to screens where you can enable DiffServ, configure marking
rules and set DSCP-to-IEEE802.1p mappings.
Routing Protocol
Static Routing This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
DHCP Relay This link takes you to a screen where you can configure the DHCP relay settings for
the network on the switch.
Management
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION