ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 81)

Chapter 6 Basic Setting
VES-1616F-3x Series User’s Guide
81
Figure 25 VDSL Alarm Profile Setup
The following table describes the labels in this screen.
Table 15 VDSL Alarm Profile Setup
LABEL DESCRIPTION
Name Enter a descriptive name for identification purposes.
15 Minute LOFs
Threshold
Enter the number of Loss Of Framing seconds (LOFs) that are permitted to occur
within 15 minutes.
15 Minute LOSs
Threshold
Enter the number of Loss Of Signals seconds (LOSs) that are permitted to occur
within 15 minutes.
15 Minute LPRs
Threshold
Enter the number of Loss of PoweR seconds (LPRs) is permitted to occur within
15 minutes.
15 Minute LOLs
Threshold
Enter the number of Loss Of Link seconds (LOLs) that are permitted to occur
within 15 minutes.
15 Minute ESs
Threshold
Enter the number of Errored Seconds (ESs) that are permitted to occur within 15
minutes.
15 Minute SESs
Threshold
Enter the number of Severely Errored Seconds (SESs) that are permitted to occur
within 15 minutes.
15 Minute UASs
Threshold
Enter the number of UnAvailable Seconds (UASs) that are permitted to occur
within 15 minutes.
Initialization
Failure
Select On to trigger an alarm for an initialization failure trap.
Select Off to disable trap sending when a line fails to initialize.
Add Click Add to save the new rule to the switch. It then displays in the summary table
at the bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Clear Click Clear to clear the fields to the factory defaults.
Name This field displays the descriptive name for the alarm profile.
LOSs This field displays the number of Loss Of Signal (LOS) seconds that are permitted
to occur within 15 minutes.
ESs This field displays the number of Errored Seconds (ESs) that are permitted to
occur within 15 minutes.