ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 151)

Chapter 21 Multicast
VES-1616F-3x Series User’s Guide
151
21.6 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source
port for each multicast VLAN. Click Advanced Application and Multicast in the navigation
panel. Click the Multicast Setting link and then the MVR link to display the screen as shown
next.
See
Section 21.5 on page 149 for background information.
"
You can create up to three multicast VLANs and up to 266 multicast rules on
the switch.
"
Your switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 61 MVR