ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 64)

Chapter 6 Basic Setting
VES-1616F-3x Series User’s Guide
64
Figure 19 System Info
The following table describes the labels in this screen.
Table 9 System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the switch for identification purposes.
OS F/W
Version
This field displays the version number of the switch 's current firmware including the
date created.
Modem Code
F/W Version
This field displays the version number of the switch 's current VDSL modem code
version.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the switch.
Hardware Monitor
Temperature
Unit
The switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
Temperature IFE8, Switch and ADT7463 refer to the location of the temperature sensors on the
circuit board.
Current This shows the current temperature in degrees centigrade at this sensor.
MAX This field displays the maximum temperature measured at this sensor.
MIN This field displays the minimum temperature measured at this sensor.
Threshold This field displays the upper temperature limit at this sensor.
Status This field displays Normal for temperatures below the threshold and Error for those
above.
If Error displays, check that the fans are working and make sure that you do not
block ventilation holes on the switch.
Fan Speed
(RPM)
A properly functioning fan is an essential component (along with a sufficiently
ventilated, cool operating environment) in order for the device to stay within the
temperature threshold. Each fan has a sensor that is capable of detecting and
reporting if the fan speed falls below the threshold shown.