ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 237)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
237
32.11.6 vdsl-alarmprofile Commands
The following table lists the vdsl-alarmprofile commands in configuration mode.
group <name-str>
start-address <ip>
end-address <ip>
Sets the multicast group range for
the MVR.
13
inactive Disables MVR settings. 13
mode
<dynamic|compatible>
Sets the MVR mode. 13
name <name> Sets the MVR name for identification
purposes.
13
no group Disables all MVR group settings. 13
group <name> Disables the specified MVR group
setting.
13
inactive Enables MVR. 13
receiver-port
<port-list>
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
13
source-port
<port-list>
Disables the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
13
tagged <port-
list>
Sets the port(s) to remove VLAN
tags.
13
receiver-port <port-
list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a multicast
VLAN
13
source-port <port-
list>
Sets the source port(s).
An MVR source port can send and
receive multicast traffic in a multicast
VLAN
13
tagged <port-list> Sets the port(s) to include VLAN
tags.
13
Table 83 mvr Commands (continued)
COMMAND DESCRIPTION P
Table 84 vdsl-alarmprofile Commands
COMMAND DESCRIPTION P
vdsl-
alarmprofile
<name>
Enters the VDSL alarm profile mode. 13
15minsESs
<threshold>
Sets the number of Errored Seconds
(ES) allowed in any 15-minute
period. An alarm is triggered if this
number is exceeded.
13