ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 223)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
223
32.11.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
Table 81 Command Summary: Configuration Mode
COMMAND DESCRIPTION P
admin-
password
<pw-string> <confirm-
string>
Changes the administrator
password.
14
bandwidth-
control
Enables bandwidth control. 13
bcp-
transparency
Enables Bridge Control
Protocol (BCP) transparency.
13
classifier <name> <[packet-format
<802.3untag|802.3tag|E
therIIuntag|EtherIItag
>][priority <0-7> ]
[vlan <vlan-id> ]
[ethernet-type <ether-
num|ip|ipx|arp|rarp|ap
pletalk|decnet|sna|net
bios|dlc][source-mac
<src-mac-addr>]
[source-port <port-
num>][destination-mac
<dest-mac-addr> ]
[dscp<0-63>][ip-
protocol<protocol-
num|tcp|udp|icmp|egp|o
spf|rsvp|igmp|igp|pim|
ipsec> [establish-
only]][source-ip <src-
ip-addr>[mask-bits
<mask-bits>]]
[source-socket
<socket-num>]
[destination-ip <dest-
ip-addr> [mask-bits
<mask-bits>]]
[destination-socket
<socket-num>]
[inactive]>
Configures a classifier. A
classifier groups traffic into
data flows according to
specific criteria such as the
source address, destination
address, source port number,
destination port number or
incoming port number.
13
help Displays command
information.
13
cluster <vlan-id> Sets the cluster management
VLAN ID.
13
member <mac-address> password
<password-str>
Sets the cluster member
switch's hardware MAC
address and password.
13
name <cluster name> Configures a name to identify
the cluster manager.
13
rcommand <mac-address> Logs into a cluster member
switch.
13
default-
management
<in-band|out-of-band> Specifies through which traffic
flow the switch is to send
packets.
13
dhcp-relay Enables DHCP relay settings. 13