ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual
Page 225
Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
225
default-gateway
<ip>
Sets the default gateway’s IP
address.
13
name-server
<ip>
Sets the IP address of a
domain name server.
13
route<ip> <mask>
<next-hop-ip>
Creates a static route.
13
[metric <metric>]
[name <name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority
<1-65535>
Sets the priority of an active
port using LACP.
13
loginPreceden
ce
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
14
logins
username <name>
password <pwd>
Configures up to four read-
only login accounts.
14
privilege <0-14>
Sets the access privilege for
the existing login accounts.
The higher the value, the more
commands are allowed.
14
logout
Exits from the CLI.
13
mac-aging-
time
<10-3000>
Sets learned MAC aging time.
13
mac-filter
name <name> mac <mac-
addr> vlan <vlan-id>
drop <src/dst/both>
Configures a static MAC
address port filtering rule.
13
inactive
Disables a static MAC address
port filtering rule.
13
mac-forward
name <name> mac <mac-
addr> vlan <vlan-id>
interface <interface-
id>
Configures a static MAC
address forwarding rule.
13
inactive
Disables a static MAC address
forwarding rule.
13
mirror-port
Enables port mirroring.
13
<port-num>
Sets a monitor port.
13
mode zynos
Changes the CLI mode to the
ZyNOS format.
13
multi-login
Enables multi-login.
14
mvr <vlan-id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See
for more information.
13
no
bandwidth-control
Disable bandwidth control on
the switch.
13
Table 81 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
P