ZyXEL Communications P-1100 - Manual (Page 15)

Prestige 1100 Internet Access Router
Getting to know your Prestige 1-1
Chapter 1:
Getting to Know Your Bridge/Router
The Prestige 1100 is a high-performance bridge/router that offers a complete solution for your WAN
applications such as Internet access and multi-protocol LAN-to-LAN connections for SMB (Small &
Medium Size Businesses). It integrates the routing and bridging functions in a single package and is
easy to install and to configure since you do not need to set any switches.
In addition, the Prestige 1100 supports synchronous mode on its WAN port, allowing it to connect to
T1/E1 or FT1/FE1 (Fractional T1/E1) leased lines via CSU/DSUs (Channel Service Unit/Data Service
Units).
1.1 Quick Feature Overview of the Prestige 1100
§ One WAN port with various interface support: RS-449/V.35/X.21/EIA 530/RS-232
§ Two auto-sensing 10/100M Ethernet interfaces
§ PPP for WAN connection
§ IP/IPX and transparent bridging
§ IP Multicast
§ IP Policy Routing to support traffic management
§ Network Address Translation for private IP address support
§ Remote Management
§ SNMP manageable
§ IP packet filtering, including network level and device level filtering
§ 100V~240V internal power supply and rack size for MIS environment
1.2 Detailed Features of the Prestige 1100
The following are the key features of the P1100.
One WAN port for various WAN Solutions
Your Prestige 1100 provides one WAN port with a 68-pin D type connector. It supports several
interfaces (RS-449/V.35/X.21/EIA 530/RS-232) to connect to various WAN devices for up to E1 speed
(2.048Mbps).