ZyXEL Communications P-1100 - Manual (Page 32)

Prestige 1100 Internet Access Router
2-12 Hardware Installation & Initial Setup
2.9 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. There are
actually three Menu 3s:
1st. Menu 3 – Ethernet Setup – allows you to select the LAN (1 or 2) you wish to configure.
2nd. Menu 3 - Ethernet Setup (LAN 1) – allows you to configure the LAN 1 Ethernet interfaces.
Choose 1 from the first Menu 3 to get to this menu.
3rd. Menu 3 - Ethernet Setup (LAN 2) – allows you to configure the LAN 2 Ethernet interfaces.
Choose 2 from the first Menu 3 to get to this menu.
From the Main Menu, enter 3 to bring up (the first) Menu 3 – Ethernet Setup. Select the LAN that
you wish to configure.
Figure 2-9 Menu 3 - Ethernet Setup - Select LAN
Select 1 to bring you to Menu 3 - Ethernet Setup (LAN 1) that you will use to configure the Ethernet
interfaces. These submenus are also identical for Menu 3 - Ethernet Setup (LAN 2).
Figure 2-10 Menu 3 – Ethernet Setup
Menu 3 - Ethernet Setup (LAN 1)
1. General Setup
2. TCP/IP and DHCP Setup
3. Novell IPX Setup
4. Bridge Setup
Enter Menu Selection Number:
Menu 3 – Ethernet Setup
1. LAN1
2. LAN2