ZyXEL Communications P-1100 - Manual (Page 94)

Prestige 1100 Internet Access Router
11-2 Telnet Configuration
11.2 Telnet Under SUA
When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the
outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you
must first telnet to the inside server, and then telnet from the server to the Prestige using its inside LAN IP
address. If no insider server is specified, telnet to the SUA’s IP address will connect to the Prestige directly.
11.3 Telnet Capabilities
11.3.1 Single Administrator
To prevent confusion and discrepancy on the configuration, your Prestige only allows one administrator to
log in at any time. Your Prestige also gives priority to the console port over telnet. If you have already
connected to your Prestige via telnet, you will be logged out if another user logs in to the Prestige via the
console port.
11.3.2 System Timeout
There is a system timeout of 5 minutes (300 seconds) for either the console port or telnet. Your Prestige
1100 will automatically log you out if you do nothing in this timeout period, except when it is continuously
updating the status in Menu 24.1.