ZyXEL Communications P-1100 - Manual (Page 26)

Prestige 1100 Internet Access Router
2-6 Hardware Installation & Initial Setup
The SMT displays the Main Menu, as shown below:
Figure 2-4 SMT Main Menu
The following table shows the Main Menu Summary ,
Table 2-2 Main Menu Summary
# Menu Title Description
1 General Setup Use this menu to setup general information and enable routing or bridging
of specific protocols.
2 WAN Setup Use this menu to setup the WAN port configuration.
3 Ethernet Setup Use this menu to setup the Ethernet configuration.
4 Internet Access Setup A quick and easy way to setup Internet connection.
11 Remote Node Setup Use this menu to setup the remote node for LAN-to-LAN connection,
including Internet connection.
12 Static Routing Setup Use this menu to setup static route for different protocols. There are eight
static routes for each protocol.
15 SUA Server Setup Use this menu to specify inside servers when SUA is selected.
21 Filter Set Configuration Setup filters to be used in Menu 3 and Menu 11 to provide security, call
control, etc.
22 SNMP Configuration Use this menu to setup SNMP related parameters
23 System Security Use this menu to setup security related parameters.
24 System Maintenance Provides system status, diagnostics, firmware upload, etc.
25 IP Routing Policy Setup Setup configuration for Routing Policies.
99 Exit To exit from SMT and return to the blank screen.
Copyright (c) 1999 ZyXEL Communications Corp.
P1100 Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. Ethernet Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
25. IP Routing Policy Setup
99. Exit
Enter Menu Selection Number: