ZyXEL Communications P-1100 - Manual (Page 22)

Prestige 1100 Internet Access Router
2-2 Hardware Installation & Initial Setup
2.3 Connect your WAN Bridge/Router
2.3.1 Prestige 1100 Connections
This section outlines how to make the connections to your Prestige 1100. Please refer to the following
figure when making connections to the P1100.
Figure 2-1 P1100 Connections
Step 1. Connect WAN Devices to your Prestige 1100
Connect the port of a WAN device to the WAN port on the Prestige 1100 using an appropriate cable.
Please consult the documentation of your WAN device for detailed information when making the
connections.
Step 2. Connecting the Console Port
For the initial configuration of your Prestige, you need to use terminal emulator software on a
workstation and connect it to the Prestige through the console port. A modem can be connected
directly to the Prestige console port for remote configuration (see Figure 1-1). The PC - Prestige
console port direct connection must be made via a null modem (supplied). The Prestige console port is