ZyXEL Communications P-1100 - Manual (Page 61)

Prestige 1100 Internet Access Router
IPX Configuration 6-3
l LAN with a server (server side)
l LAN without a server (client side)
Prestige
1100
Prestige
1100
Seed Router (Client Side)
Network Number Assigns
Not Seed Router (Server Side)
Network Number Learns
Netware Clients
Netware Server
Figure 6-2 Prestige in an IPX Environment
6.2.1 Prestige 1100 on LAN with Server
If your Prestige is on a LAN with a seed router, you do not need to configure the LAN network
numbers. Your Prestige will learn the network number from the seed router and add the routes to its
routing table.
6.2.2 Prestige 1100 on LAN without Server
Each IPX network must have a seed router. If you only have NetWare clients on your network, then
you must configure the Prestige as a seed router and set up unique network numbers for each frame
type enabled using the Ethernet Setup Menu.