ZyXEL Communications P-1100 - Manual (Page 67)

Prestige 1100 Internet Access Router
IPX Configuration 6-9
Table 6-3 Edit IPX Static Route Menu Fields
Field Description
Route # This is the index number of the route as listed in Menu 12.2 – IPX Static Route
Setup.
Server Name In this field, enter the name of the server. This must be the exact name
configured in the NetWare server.
Active This field allows you to activate/deactivate this static route.
Network # This field contains the internal network number of the remote server that you
wish to access. [00000000] or [FFFFFFFF] are reserved.
Node # This field contains the address of the node on which the server resides. If you
are using a Novell IPX implementation, this value is [000000000001].
Socket # This field contains the socket number on which the server will receive service
requests. The default for this field is hex [0451].
Type # This field identifies the type of service the server provides. The default for this
field is hex [0004].
Hop Count and
Tick Count These two fields have the same meaning as those in the Ethernet setup.
Once you have completed filling in the menu, press [ENTER] at the message [Press ENTER to
Confirm…] to save your configuration, or press [ESC] to cancel.