ZyXEL Communications P-1100 - Manual (Page 58)

Prestige 1100 Internet Access Router
5-8 Remote Node TCP/IP Configuration
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.
Table 5-3 Edit IP Static Route Menu Fields
Field Description Options
Route # This is the index number of the route as listed in
Menu 12.1 – IP Static Route Setup.
Route Name Enter a descriptive name for this route. This is for
identification purpose only.
Active This field allows you to activate/deactivate this static
route. [Yes]/[No]
Destination IP Address This parameter specifies the IP network address of
the final destination. Routing is always based on
network number. If you need to specify a route to a
single host, use a subnet mask of 255.255.255.255
in the subnet mask field to force the network number
to be identical to the host ID.
IP Subnet Mask Enter the subnet mask for this destination. Follow
the discussion on IP subnet mask in this chapter.
Gateway IP Address Enter the IP address of the gateway. The gateway is
an immediate neighbor of your Prestige that will
forward the packet to the destination. On the LAN,
the gateway must be a router on the same segment
as your Prestige; over WAN, the gateway must be
the IP address of one of the remote nodes.
Metric Same meaning as those in the Remote Node Setup. [1] to [15]
Private Same meaning as those in the Remote Node Setup. [Yes]/[No]