ZyXEL Communications P-1100 - Manual (Page 96)

Prestige 1100 Internet Access Router
12-2 System Maintenance
12.1 System Status
The first selection, System Status gives you the status and statistics of the ports, as shown below. System
Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on WAN
port status, number of packets sent and number of packets received.
To get to the System Status, select number 24 to go to Menu 24 - System Maintenance. From this menu,
select number 1, System Status.
The following figure shows the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Figure 12-2 Menu 24.1 - System Maintenance – Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status.
Menu 24.1 -- System Maintenance – Status
Status
Down
TXPkts
0
RXPkts
0
Errors
0
Tx(Byte/s)
0
Rx(Byte/s)
0
Up Time
0:00:00
WAN IP Addr:
Ethernet 1:
Status: 100M/Half Duplex
TX Pkts: 52
RX Pkts: 537
Collisions: 0
Ethernet 2:
Status: 100M/Half Duplex
TX Pkts: 52
RX Pkts: 537
Collisions: 0
Press Command:
COMMANDS: 1- Drop Port 9- Reset Counters ESC-Exit