Xerox 4220/MRP - Manual (Page 18)

INSTALLATION
Complete these steps to supply access codes for outside calls:
1. Do one of the following:
• Enter the access code, and press Enter to move to the
next field.
or
• Press Enter from the blank field if you do not need any
outside access codes. (If you only need to use variable
outside access codes for certain calls, you may leave this
field blank and specify the code number when you send
the fax. At that time you can also override any default
access code.)
A second field appears on the Telephone Settings screen,
asking you to specify whether your telephone system uses
tone or pulse dialing.
2. Press Enter to continue.
A menu appears that lets you select tone or pulse dialing.
The default is tone dialing.
3. Select the correct dialing method and press Enter.