Xerox 4220/MRP - Manual (Page 75)

TROUBLESHOOTING
Fax Queue is not the most recently installed memory resident
program. Unload the most recently installed utility first.
PSFAXQ.COM must be the last memory resident program loaded
in order to be unloaded using the PSFAXQ/U command. If not,
try unloading more recently loaded programs and then try issuing
the PSFAXQ/U command again. If you cannot unload more
recently loaded programs, you must reboot without the PSFAXQ
command in your AUTOEXEC.BAT file to remove PSFAXQ.COM
from memory.
Fax Queue encountered an error releasing its memory segment
while unloading.
You will need to reboot without PSFAXQ in your AUTOEXEC.BAT
file if you need to unload PSFAXQ.
Fax Queue is unloaded.
Unrecognized command:
The Fax Queue command line switches are:
/e release environment space when loading Fax Queue
/h show this help screen
/u unload the resident Fax Queue
The message indicates you tried to use a command line switch
that PSFAXQ.COM does not recognize. Only the above switches
are recognized.
Fax Queue cannot located the home directory. You can put the
PSFAX directory in your PATH statement, or use the SET PSFAX=
command before loading PSFAX to solve this problem.
For example:
SET PSFAX = C:\PSFAX
PSFAX
Fax Queue can’t load because the configuration file PSFAX.CFG
is missing in the PSFAX directory. You can run INSTALL to
create a new PSFAX.CFG file.
There is an error in the configuration file PSFAX.CFG at the
XXX line.
Could not find Fax Queue Control directory
There is XXX unsuccessful fax job in the fax queue.
Use FAXMGR to reschedule or delete it.
Press ENTER to continue...
There are XXX unsuccessful fax jobs in the fax queue.
Use FAXMGR to reschedule or delete them.
Press ENTER to continue...
Problems encountered when using the fax software
This program problem and solution is provided as a model for
further troubleshooting information.
Problem: The printer fails when I try to send or receive a fax.
Solution: The printer may have inadequate memory to support
the fax software. The printer must have a minimum of 8 MB of
RAM to support the fax software. 20 MB of RAM is
recommended for better performance and for faxing longer
documents.
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE 5-3