Xerox 4220/MRP - Manual (Page 55)

ADMINISTERING THE FAX SOFTWARE
The Edit Fax Printer Password screen appears.
2. Select Enter a New Fax Password, and press Enter.
3. Type in the new password (30 characters or less), or edit
your old password by overtyping, and press Enter.
A confirmation message appears.
4. Click on Y to confirm that you want to change the password.
Changing automatic loading and Windows installation with INSTALL/U
INSTALL/U can be used to add or remove automatic loading, and
to add or remove the fax software from Windows.
Follow these steps to use the INSTALL/U command:
1. Type \PSFAX\INSTALL/U at the MS-DOS prompt.
2. Press Enter.
The two examples below show you how to remove automatic
loading and Windows installation (assuming these features were
chosen when you ran the install program).
Follow these steps to remove the fax software from your
AUTOEXEC.BAT file:
1. Select Remove the Fax Software from the Autoexec file.
2. Press Enter.
A confirmation message displays.
3. Press Enter.
4. Select Skip This Step Without Changing Windows in the
Windows Installation screen.
5. Press Enter.
Follow these steps to remove the fax software from Windows :
1. Select Skip This Step Without Changing the Autoexec File.
2. Press Enter.
3. Select Remove the fax software from Windows.
4. Press Enter.
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE 3-9