Xerox 4220/MRP - Manual (Page 66)

FAX SETUP MENU
Header
The Header option enables or disables the printing of a header
on the sent fax document. The factory default is on, Enable*.
Receive Setup
The Receive Setup options allow you to make changes to the
settings which affect the incoming fax documents received at
your printer. The Receive Setup options include:
• Ring Count
• Input Tray
• Automatic Tray Switching
• Output Destination.
Ring Count
The Ring Count option sets the number of rings the Fax Modem
waits before answering the phone. The number of rings is
entered as one or two digits (1 through 10). The factory default
is 2*.
Input Tray
The Input Tray option determines the default input paper tray or
trays to be utilized for a fax received.
Settings include:
• Tray 1
• Tray 2
• Tray 3
• Tray 4 *
• Tray 5.
N Note: If tray 4 is not installed, tray 1 becomes the default
tray.
Automatic Tray Switching
The Automatic Tray Switching option determines if fax jobs
feeding from a given tray switch to another tray of the same size
when the first tray runs out of paper.
Settings include:
• Enable*
Allows fax jobs to switch to other trays containing the same
paper size as the tray that is out of paper.
• Disable
Does not allow fax jobs to switch to other trays once the
initial tray is out of paper.
4-6 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE