Xerox 4220/MRP - Manual (Page 64)

FAX SETUP MENU
Fax setup item descriptions
The following items and options are available through the Fax
Setup menu:
• Fax Mode
• Clock Setup
• Send Setup
• Receive Setup.
The default settings for these items can be changed through the
control panel.
The changes you make to these menu items become the default
settings, in place each time the printer is powered up.
Fax Mode
The Fax Mode can be set to send and receive, to send only, to
receive only, or to be completely disabled through this menu
item. When disabled, the fax modem board is completely non-
operational and does not answer any incoming phone calls or
accept and fax modem jobs sent from the host computer. The
factory default is Send and Receive*.
Clock Setup
The time and date can be set to the current time and date with
this menu item. The fax modem board uses the time and date to
stamp the arrival of a fax on the printed page (if the Header
option is enabled).
Date
The date is entered in the following format:
Date MO/DY/YR
Where:
MO is a one or two-digit number that represents the
current month. For example, 01 = January, 07 = July,
and 12 = December.
DY is a two-digit number (01 through 31) representing
the current day of the month. For example, if today is
May 4, it is entered as 04.
YR is a two-digit number representing the current year.
For example, the number 95 represents the year 1995.
The factory default is set to 01/01/95.
4-4 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE