Acnodes FPC 6104 - Manual (Page 103)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial fanless Panel PC
A.1.3 Product Disposal
CAUTION:
Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace
the on-board battery.
Dispose of used batteries according to instructions and local regulations.
-Outside the European Union - If you wish to dispose of used electrical and electronic
products outside the European Union, please contact your local authority so as to
comply with the correct disposal method.
-Within the European Union:
EU-wide legislation, as implemented in each Member State, requires that waste electri
cal and electronic products carrying the mark (left) must be disposed of separately from
normal household waste. This includes monitors and electrical accessories, such as
signal cables or power cords. When you need to dispose of your display products,
please follow the guidance of your local authority, or ask the shop where you purchased
the product. The mark on electrical and electronic products only applies to the current
European Union Member States.
Please follow the national guidelines for electrical and electronic product disposal.
A.2 Maintenance and Cleaning Precautions
When maintaining or cleaning the FPC6104, please follow the guidelines below.
A.2.1 Maintenance and Cleaning
Prior to cleaning any part or component of the FPC6104, please read the details below.
-Except for the LCD panel, never spray or squirt liquids directly onto any other components. To
clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth.
-The interior of the FPC6104 does not require cleaning. Keep fluids away from the FPC6104
interior.
-Be cautious of all small removable components when vacuuming the FPC6104.