Fpc 6104 – Acnodes FPC 6104 User Manual

Page 58

Advertising
background image

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

© Copyright 2011 Acnodes, Inc.

All rights reserved. Product description and product specifications

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

FPC 6104

10.4” Industrial Fanless Panel PC

UDMA3
Ultra DMA mode 3 selected with a maximum data transfer rate of 44MBps (To use
this mode, it is required that an 80-conductor ATA cable is used.)

UDMA4
Ultra DMA mode 4 selected with a maximum data transfer rate of 66.6MBps (To use
this mode, it is required that an 80-conductor ATA cable is used.)

UDMA5
Ultra DMA mode 5 selected with a maximum data transfer rate of 99.9MBps (To use
this mode, it is required that an 80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis
and Reporting Technology (SMART) on the drive on the specified channel.
S.M.A.R.T predicts impending drive failures. The S.M.A.R.T BIOS option enables or
disables this function.

Auto DEFAULT
BIOS auto detects HDD SMART support.

Disabled
Prevents BIOS from using the HDD SMART feature.

Enabled
Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Disabled
Prevents the BIOS from using 32-bit data transfers.
Enabled

DEFAULT

Allows BIOS to use 32-bit data transfers on supported hard disk drives.

Advertising