Acnodes FPC 6104 - Manual (Page 45)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial fanless Panel PC
Step 3: Insert the device connector. Once aligned, gently insert the USB device con-
nector into the onboard connector.
4.11.5 VGA Monitor Connection
The FPC6104 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a
monitor to the FPC6104, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15 con-
nector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
FPC6084. See Figure 4-37.