Acnodes FPC 6104 - Manual (Page 72)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
USB Functions [Enabled]
Use the USB Function option to enable or disable the USB controllers.
Disabled USB controllers are enabled
Enabled DEFAULT USB controllers are disabled
USB 2.0 Controller [Enabled]
The USB 2.0 Controller BIOS option enables or disables the USB 2.0 controller
Disabled USB function disabled
Enabled DEFAULT USB function enabled
USB2.0 Controller Mode [HiSpeed]
The USB2.0 Controller Mode BIOS option sets the speed of the USB2.0 controller.
FullSpeed The controller is capable of operating at full speed 12 Mb/s
HiSpeed DEFAULT The controller is capable of operating at high speed
480 Mb/s
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does
not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.
Disabled
Legacy USB support disabled
Enabled
DEFAULT
Legacy USB support enabled
Auto
Legacy USB support disabled if no USB devices are connected