Acnodes FPC 6104 - Manual (Page 43)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial fanless Panel PC
Step 1: Locate the RJ-45 connectors on the bottom panel of the FPC6104.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the FPC6104. See
Figure 4-34.
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
4.11.3 Serial Device Connection
The FPC6104 has two single male DB-9 connectors on the bottom panel for a serial
device. Follow the steps below to connect a serial device to the FPC6104 panel PC.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 2.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into the
DB-9 connector on the bottom panel. See Figure 4-35.