Acnodes FPC 6104 - Manual (Page 16)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.2 INTEL ATOM PROCESSOR
A 45nm N270 Intel® Atom™ processor is installed in the system. The processor has a CPU speed
of 1.6 GHz and a 533 MHz front side bus (FSB). The processor also comes with a 512 KB L2 cache
and a 1.6 GHz L2 cache speed. Some of the features of the Intel® Atom™ processor N270 are
listed below:
-On-die, primary 32-kB instructions cache and 24-kB write-back data cache
-533-MHz source-synchronous front side bus (FSB)
-2-Threads support
-On-die 512-kB, 8-way L2 cache
-Support for IA 32-bit architecture
-Intel® Streaming SIMD Extensions-2 and -3 (Intel® SSE2 and Intel® SSE3) support and
Supplemental Streaming SIMD Extension 3 (SSSE3) support
-Micro-FCBGA8 packaging technologies
-Thermal management support via Intel® Thermal Monitor 1 and Intel Thermal Monitor 2
-FSB Lane Reversal for flexible routing
-Supports C0/C1(e)/C2(e)/C4(e)
-L2 Dynamic Cache Sizing
-Advanced power management features including Enhanced Intel SpeedStep® Technology
-Execute Disable Bit support for enhanced security
2.3 MOTHERBOARD COMPONENTS
The following sections describe some of the features on the motherboard.
2.3.1 MEMORY SUPPORT
2.3.1.1 INSTALLED MEMORY
One 200-pin 1.0 GB 533 MHz DDR2 SDRAM SO-DIMM is installed in the
FPC6104 and controlled by the Intel® 945GSE GMCH installed on the internal
motherboard.