Acnodes FPC 6104 - Manual (Page 32)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
4.9.4 CF Card Setup
Jumper Label:
JCF1
Jumper Type: 2-pin header
Jumper Settings:See Table 4-4
Jumper Location:
See Figure 4-17
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the
slave device or the master device. CF Card Setup jumper settings are shown in Table
4-4.
The CF Card Setup jumper location is shown in Figure 4-17.