Fpc 6104, Chapter 4 installation – Acnodes FPC 6104 User Manual
Page 25
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial fanless Panel PC
CHAPTER 4 INSTALLATION
4.1 ANTI-STATIC PRECAUTIONS
WARNING:
Failure to take ESD precautions during the maintenance of the FPC6104
may
result in
permanent damage
to
the FPC6104 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic compo-
nents, including the FPC6104. Dry climates are especially susceptible to ESD. It
is therefore critical that whenever the FPC6104 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
-Wear an anti-static wristband: - Wearing a simple anti-static wristband can help to
prevent ESD from damaging the board.
-Self-grounding: - Before handling the board touch any grounded conducting ma
terial. During the time the board is handled, frequently touch any conducting mate
rials that are connected to the ground.
-Use an anti-static pad: - When configuring the FPC6104, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
FPC6104.
-Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
4.2 INSTALLATION PRECAUTIONS
When installing the flat panel PC, please follow the precautions listed below:
-Power turned off: When installing the flat panel PC, make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or damage
to the system.
-Certified Engineers: Only certified engineers should install and modify onboard
functionalities.
-Anti-static Discharge: If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.