Fpc 6104 – Acnodes FPC 6104 User Manual
Page 68
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
Resume on Keyboard/Mouse [Disabled]
Use the Resume on Keyboard/Mouse BIOS option to enable activity on either the keyboard or mouse to
rouse the system from a suspend or standby state. That is, the
system is roused when the mouse is moved or a button on the keyboard is pressed.
Disabled(Default)
Wake event not generated by activity on the keyboard or mouse
Enabled
Wake event generated by activity on the keyboard or mouse
Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to rouse the system
from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.
Disabled (DEFAULT)
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call
Resume on PCI-Express WAKE# [Enabled]
Use the Resume PCI-Express WAKE# BIOS option to enable activity on the PCI-Express WAKE#
signal to rouse the system from a suspend or standby state.
Disabled
Wake event not generated by PCI-Express WAKE#
signal activity
Enabled (DEFAULT)Wake event generated by PCI-Express WAKE# signal
Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused from a suspended
state.
Disabled
DEFAULT
The real time clock (RTC) cannot generate a wake event
Enabled
If selected, the following appears with values that can be selected:
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.
5.3.6 Remote Configuration
Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote access parameters. The
Remote Access Configuration is an AMIBIOS feature and allows a remote host running a terminal program
to display and configure the BIOS settings.