Acnodes FPC 6104 - Manual (Page 64)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
Minimum Value: 0°C
Maximum Value: 127°C
CPU Fan Start PWM [070]
The Fan 3 Start PWM option can only be set if the CPU FAN Mode Setting option is set to Automatic
Mode. Use the Fan 3 Start PWM option to select the PWM mode the fan starts to rotate with after the
temperature specified in the Temperature 3 Limit of Start is exceeded. The Super I/O chipset supports 128
PWM modes. To select a value, select the Fan 3 Start PWM option and enter a decimal number between
000 and 127. The temperature range is specified below.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Slope PWM [0.5 PWM]
The Slope PWM 1 option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode.
Use the Slope PWM 1 option to select the linear rate at which the PWM mode increases with respect to an
increase in temperature. A list of available options is shown below:
0 PWM
1 PWM
2 PWM
4 PWM
8 PWM
16 PWM
32 PWM
64 PWM
The following system parameters and values are shown. The system parameters that are monitored are:
System Temperatures: The following system temperatures are monitored
o CPU Temperature
o System Temperature
Fan Speeds: The CPU cooling fan speed is monitored.
o CPU Fan Speed
Voltages: The following system voltages are monitored
o CPU Core
o +1.05V o +3.30V o +12.0 V o +1.5V
o +1.8V o 5VSB o VBAT