Fpc 6104 – Acnodes FPC 6104 User Manual
Page 41
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial fanless Panel PC
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the
flat panel PC.
4.10.4 Cabinet and Rack Installation
The FPC6104 flat panel PC can be installed into a cabinet or rack. To do this, please
follow the steps below.
4.10.4.1 FPC6104
Step 1: The back of the aluminum frame surrounding the LCD screen has retention
screw holes (FPC6104 has 10 holes) for a cabinet/rack installation bracket.
NOTE:
When purchasing the cabinet/rack installation bracket make sure it is compatible with
both the flat panel PC and the rack/cabinet into which the panel PC is installed.
Step 2: Slide the rear chassis through the rack/cabinet bracket until the rear side of the
LCD screen frame is flush against the front of the bracket.
Step 3: Make sure the retention screw holes at the rear of the LCD screen are aligned
with the retention screw holes in the rack/cabinet bracket.