AASTRA DT4x3 for BusinessPhone User Guide EN User Manual
Page 22
AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
16
Figure 2. Example of a display configuration in idle mode.
• The Status bar (1) is used for icons which give the user information about signal
strength, missed call, new message, phone lock, key lock, sound off, time and
battery status. This row is always visible in all screens.
• The Header bar (2) displays the current date, headset connection, Bluetooth
connection, and system connection.
• The Active area (3) are used for information such as the name of the system to
which the handset is connected to. A user identity provided from the system and/or
an Owner ID can also be displayed if configured in the Settings menu. This is also
the area for dialog window text. For example "missed calls" or to confirm an action.
• The Scroll bar (4) is placed to the right of the "Active area". It becomes visible when
a menu screen has more than six menus, or if the complete text in a message
cannot be displayed on the screen simultaneously.
• The Soft key bar (5) is used for Soft keys which can be used as short cuts for
functions in the handset. See
Icons
Figure 2.
“Signal strength” icon is visible in the upper left corner. The staples
shown in display depends on the signal strength.
“Full battery” icon is displayed in upper right corner.
"Low battery warning” icon is shown when the battery has 10% or
less remaining capacity left.
"Empty battery warning" icon is flashing when the battery has 5%
or less remaining capacity left.
“Sound off” icon is displayed when the Sound off key or Mute
button is pressed.
"Microphone off" icon indicates a silenced microphone. It is
displayed after a long press on the Sound off key or Mute button
during a call.
003
Menu
11:00
01/12/2011
123456
System A
1
2
3
5
4