AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 69)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
63
When an alarm is activated, the corresponding alarm icon is show, see Table 5.
Table 5. Alarms icons
Note: See also the handset’s Configuration Manual for additional settings and 7 Alarm
Operation on page 38.
8.9 Connections
8.9.1 Bluetooth
Enable Bluetooth Connection
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Bluetooth".
4 Select "Enable". A Bluetooth connection icon will be displayed in the header
bar.
Note: When enabling Bluetooth on an intrinsically safe handset, it will be restarted.
Disable Bluetooth Connection
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Bluetooth".
4 Select "Disable".
Note: When disabling Bluetooth on an intrinsically safe handset, it will be restarted.
Pair/Connect Bluetooth Headset
In order to use a Bluetooth headset, it must first be paired with the handset. It is only
needed to pair the Bluetooth headset once. A paired Bluetooth headset will
automatically be connected indicated by the icon in front of the headset.
1 Set the Bluetooth headset in pairing mode, see the user manual for the
Bluetooth headset.
2 Enable Bluetooth, see Enable Bluetooth Connection .
3 Enter the menu by pressing "Menu".
4 Select in the menu.
Man-down alarm
No-movement alarm