AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 42)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
36
6.3.9 Transfer a Call
Prerequisite, a new call has been started during conversation, see 6.3.5 Start a New
Call during Conversation on page 35.
When a caller has two ongoing calls, he/she can transfer the first call to the second
call.
1 Press "More" during the call.
2 Select "Transfer".
3 Press "Select" to transfer the current call to the other call.
6.3.10 Transfer to New Call
An ongoing call can be transfered to a new number. When the new call is established,
the caller that initiated the transfer will be disconnected.
1 Press "More" during the call.
2 Select "Transfer to new call" 5 .
3 Press "Select".
4 Enter the number to the person the ongoing call will be transfered to.
5 Press to transfer the call.
6.3.11 Conference Call
Prerequisite, a new call has been started during conversation, see 6.3.5 Start a New
Call during Conversation on page 35.
By initiate a conference call, an conversation can be made between several
participants simultaneously.
1 Press "More" during the call.
2 Select "Conference call".
Press "Select".The person initiating the conference call is the conference leader, and
the other are participant members of the conference call.
Note! If Conference does not appear when you press "More", you can also do the
following to establish a conference: Press R, dial the number to include, and press 3.
6.3.12 Call Waiting
During an ongoing conversation and a short tone for another incoming call appears, do
as follows:
1 Press "More".
2 Select "Call waiting" 4 .
3 Press "Select". The new call is now connected, and the first call is on hold.
Note: If Call Waiting is not programmed and does not appear when you Press "More",
Press 4 (Austria, Belgium, Brazil, Denmark and Germany, press 5).
5.Only visible when the parameters "New call" and "Transfer" are defined in the PDM.