AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 70)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
64
5 Select "Bluetooth".
6 Select "Headset".
7 Select "Add new". A Put headset in Pairing mode dialog window is displayed.
8 Press "OK". It will now search for a Bluetooth headset for connection.
9 When headset is found, press "Pair".
10 If needed, enter PIN code, see user manual for the Bluetooth headset. Press
"OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon in front of the
headset.
Tip: It is possible to configure the headset button with a specific function, such as post-
dial, dial last called number, or dial a predefined number. See the handset’s
Configuration Manual for more information.
8.9.2 Headset
In order to achieve optimal audio quality with the different headset types, it is
recommended to select the corresponding headset type.
The default setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. The headset type can be changed in the menu by
doing as follows:
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "Headset".
4 Select the corresponding headset type from list, that is, "Mic on boom", or
"Hearing protection". Additional headsets
14 might be visible in the list.
5 Press "Select".
Tip: It is possible to configure the headset button with a specific function, such as post-
dial, dial last called number, or dial a predefined number. See the handset’s
Configuration Manual
for more information.
Note: When Bluetooth is disabled and having an active call in loudspeaker mode on an
intrinsically safe handset, the audio will not be transferred to the headset when
connecting it.
IMPORTANT: The headset Microphone on a boom is not available as accessory for the
intrinsically classified handset. If used, it is NOT permitted to use the headset in
hazardous areas.
8.9.3 System
The handset can subscribe up to eight different systems.
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic”, it selects a
system according to the priority list, see
Priority on page 66.
14.Only visible if a headset profile has been configured in the PDM.