AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 91)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
85
A.4 Operation
Step between the menus with the navigation key. Confirm each menu
selection by pressing the Soft key "Select".
A.4.1 Enable Bluetooth
To enable the Bluetooth function enter in the handset menu, select "Bluetooth" and
select “Enable”.
Note: When enabling Bluetooth on an intrinsically safe handset, it will be restarted.
A.4.2 Pair and Connect a Bluetooth Headset
Before a headset can be used, a connection (pairing) between the headset and the
handset must be established.
1 Place the Bluetooth headset and the handset next to each other.
2 Enable Bluetooth, see A.4.1 Enable Bluetooth .
3 Put the Bluetooth headset in pairing mode, see the user manual for the
Bluetooth headset.
4 Enter the menu by pressing "Menu".
5 Select in the menu.
6 Select "Bluetooth".
7 Select "Headset".
8 Select "Add new". An information text "Put headset in Pairing mode" is
displayed.
9 Press "OK". It will now search for a Bluetooth headset for connection.
10 When headset is found, press "Pair".
11 If needed, enter PIN code, see user manual for the Bluetooth headset. Press
"OK".
The dialog Successful pairing appears if the pairing process was successful. The
Bluetooth headset will also be connected indicated by the icon in front of the
headset.
A.4.3 Add another Bluetooth Headset
Up to eight Bluetooth headsets can be paired to the handset, but only one at a time can
be selected. To pair another headset repeat section “Pair and Connect a headset”
steps 1-6.
The paired headsets are displayed by a default name in the handset menu “Headset”.
See
A.4.6 Change the name of Bluetooth headset
A.4.4 Select a Bluetooth Headset
To activate a Bluetooth headset, enter in the handset menu, select “Bluetooth” >
“Headset”. Step with the navigation key, and to the headset to be selected and
press "Select". Connection successful is displayed. The headset is now selected.