AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 71)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
65
Subscribe System
To subscribe a system, the “Park:” (Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system
administrator for more information.
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "System".
4 Select "Subscribe".
5 The handset’s IPDI is displayed. The IPDI is a unique code that has been
assigned to the handset. Press "Next".
6 Enter System name (optional). If no system name is entered, the default name
will be used. That is System A, System B etc. depending on which system name
that is free.
Note: The System name might not be displayed depending on the handset’s
Display Management Layout setting. See the handset’s Configuration Manual.
7 Press "Next".
8 Enter PARK code (max. 31 digits). The PARK code may not be needed if there is
no alien DECT system within the coverage area.
9 Enter AC code. The AC code length must be between 4 - 8 digits.
10 Press "Next".
11 An information text "Protection on?" is displayed. Select "Yes" if the new system
is to be protected. It is not possible to delete a protected subscription from the
System menu
15 .
12 Press "OK". A searching mode starts.
Unsubscribe System
1 Enter the menu by pressing "Menu".
2 Select in the menu.
3 Select "System".
4 Select "Unsubscribe".
5 Select the system to unsubscribe.
6 Press "Yes to unsubscribe the system.
Rename System
It is possible to change the name of the system in the handset.
1 Enter the menu by pressing the “Menu” soft key.
2 Select in the menu.
3 Select "System".
4 Select "Rename System".
15.It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via
the Admin menu or the DECT system.