AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 35)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
29
5.9 In Call Menu
The In Call menu can be accessed during an ongoing call by pressing the soft key
"More".
If the handset is configured via WinPDM/CPDM3, it is possible to access a certain
function in the In call menu directly by pressing the right Soft key.
Note: If the handset is configured via WinPDM/CPDM3, it is possible to call a pre-
defined emergency number while the handset is locked or the keypad is locked. If
calling the emergency number from a locked handset, it is only possible to access the
Microphone on/off function in the In Call menu. However, the entire In call menu is
accessible when calling the emergency number from a handset with locked keypad.
5.9.1 Additional In Call Functions
Besides the default In Call functions, it is possible to define 10 extra system specific
codes/general purposes. See the handset’s Configuration Manual.
Contacts 2 >
Microphone on/off >
Audio transfer 1
1.Visible if a Bluetooth headset is connected.
>
New call
2
2.Visible if enabled/defined in handset via PDM/CPDM3.
> Call
"Phonebook access"
Cancel
Switch
2
>
End call 2 >
Transfer 2 >
Transfer to new call
3
3.Only visible when the parameters "New call" and "Transfer" are defined
in handset via PDM/CPDM3.
> Call
"Phonebook access"
Cancel
Conference
2
>
Call back 2 >
Call waiting 2 >
DTMF
2
DECT info 4
4.Visible if the Admin menu is activated.
> Link
System
General purpose 1 name 1 >
|
General purpose 3 name 1 >