AASTRA DT4x3 for BusinessPhone User Guide EN User Manual
Page 92
AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
86
When a new headset has been selected any previous headset will automatically
become disconnected.
A.4.5
Remove a Bluetooth Headset
To remove a Bluetooth headset, enter
in the handset menu, select Bluetooth >
Headset. Step with the navigation key, and to the headset to be removed and
press "More". Select "Delete". Confirm with "Select".
A.4.6
Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name enter
in the menu, select “Bluetooth” > “Headset”. Step with
the navigation key, and , to select the headset. Select "More" > “Edit name”. See
A.5
Calling
A.5.1
Make a Call
Dial the number on the handset and press "Call", or
. When “Transfer call to
phone?” is displayed press "No" or ignore the message to use the Bluetooth Headset.
Press "Yes" to use the handset.
A.5.2
Answer a Call
A ring signal sounds in both the selected Bluetooth headset and the handset to signal
an incoming call.
To answer the call in the Bluetooth headset, press the button
18
on the headset.
To answer the call in the handset, press
on the handset.
A.5.3
End a Call
To end the call press the button
17
on the headset, or
on the handset.
A.6
Volume/Mute Control
A.6.1
Adjust the Volume During a Call
Depending on the Bluetooth headset it might be possible to adjust the volume on the
headset
17
. On the handset, press
to increase the volume and
to decrease the
volume in the headset.
A.6.2
Turn the Microphone On/Off During a Call
Mute both headset and handset by pressing
or
on the handset.
A.7
Messaging
When a text message is received a beep sounds in the Bluetooth headset.
18. For instruction, see headset manual.