AASTRA DT4x3 for BusinessPhone User Guide EN - Manual (Page 41)

AMT/PUD/TR/0119/1/2/EN 2012-08-13
User Manual
Cordless Phones for BusinessPhone™
35
6.3.4 Audio Transfer
To transfer audio between the Bluetooth headset and the handset’s earpiece, do as
follows:
1 Press "More" during the call.
2 Select "Audio transfer" 4 .
3 Press "Select".
6.3.5 Start a New Call during Conversation
1 Press "More" during the call.
2 Select "New Call".
3 Press "Select".
4 Enter the number and press , or "Call".
6.3.6 CallBack
When a call is made to a busy extension, it is possible to automatically call back when
the busy extension is free. If you order call back when there is no answer, you will be
called back when the extension has been used the next time.:
1 Press "More".
2 Select "Callback"
3 Press "Select".
Note : If Callback is not programmed and does not appear when you press "More",
Press 5 (Austria, Belgium, Brazil, Denmark and Germany Press 6).
4 Press and wait until the handset alerts.
5 Press to answer when you are called back. The system calls the extension.
6.3.7 Switch between Calls
Prerequisite, a new call has been started during conversation, see 6.3.5 Start a New
Call during Conversation on page 35.
1 Press "More" during the call.
2 Select "Switch".
3 Press "Select" to switch to the other call. The first call is on hold.
If needed, repeat the steps above to switch between the calls.
6.3.8 End a Call
Prerequisite, a new call has been started during conversation, see 6.3.5 Start a New
Call during Conversation on page 35.
1 Press "More" during the call.
2 Select "End Call".
3 Press "Select". This will end the current call and the previous call is resumed.
4.Visible if Bluetooth connection is active.