Grain Systems PNEG-1797 - Manual (Page 18)

2. Decals
18 PNEG-1797CE CE Approved T-Series Tower Dryer
DC-2232
Slip and fall hazard
Can cause severe
injuries
Do NOT step or stand
in this area
DC-2233
If an overload or a fault current
interruption occurs, circuits must
be checked to determine the cause
of the interruption
If a fault condition exists, the
current-carrying components should
be examined and replaced if
damaged, and the integral current
sensors must be replaced
Electric shock and
fire hazard
DC-2234
To maintain overcurrent short
circuit and ground fault
protection, the manufacturer’s
instructions for selecting
overload relays and setting
the instantaneous trip circuit
breaker must be followed
Electric shock and
fire hazard
DC-2234
DC-2234 is located on inside main power
panel door.
Quantity: 1
DC-2233
DC-2233 is located on inside main power
panel door.
Quantity: 1
DC-2232
DC-2232 is located on roof panels adjacent
to roof steps.
Quantity: 4