Grain Systems PNEG-1797 - Manual (Page 26)

26 PNEG-1797CE CE Approved T-Series Tower Dryer
4. Dryer Installation
Dryer Layout
System Layout
When considering dryer location make allowance for:
1. Grain handling systems.
2. Location of storage bins.
3. Wet grain supply.
4. Prevailing wind direction.
5. Fuel and power supply.
6. Noise.
7. Control panel location.
Site Location
Do not locate the dryer:
1. Inside a building.
2. Adjacent to combustible material which may be sucked in.
3. Within 2.0 m of other structures. Refer to specifications on Pages 20-22 and dimensions
on Pages 23-25 .
You may need to obtain local permission for the dryer construction and should also consider:
1. Electrical code.
2. Fuel installation regulations.
3. Insurance requirements.
Foundation
Standard foundation details are given in Figure 4A on Page 27 and Figure 4B on Page 28 . For ground
conditions outside of these standards a local engineer will be required to carry out site specific
foundation design.