Grain Systems PNEG-1797 - Manual (Page 57)

8. Dryer Start-Up and Operation
PNEG-1797CE CE Approved T-Series Tower Dryer 57
Figure 8D
21. Turn UNLOAD to AUTO. Advanced moisture control is now active.
Figure 8E
22. Set the target moisture and let the dryer run. Make no more changes to allow the system to stabilize.
23. The dryer runs in MANUAL for 30 minutes being switched to AUTO to ensure grain is flowing evenly.
The screen displays a timer to show remaining time to full AUTO control.
Calibrate sensors
by touching the
arrows buttons.
Press and set target
moisture content