Grain Systems PNEG-365 - Manual (Page 15)

15
Grain Systems, Inc. Assumption, Ill.
18' Manual Batch
All bolts are standard bin bolts with neoprene washers. For horizontal and vertical seam bolts, the bolt head and
neoprene washers are on the outside of the bin.
Note: For the splice plates FC-42076 use 5/16" x 1.1/4" bolts for the stiffener to sidewall connections.
Standard (17 Gauge Thru 20 Gauge) Sheet Bolting Detail
(Viewed from outside of the bin)
Overlap Seam
Stiffener to
Sidewall
Horizontal Seam
Vertical Seam
Figure #13
Sidewall Horizontal Vertical Stiffener Overlap
Gauge Seam Seam To Sidewall Seam
17 Thru 20 5/16" x 3/4" 5/16" x 3/4" 5/16" x 3/4" 5/16" x 3/4"
[10] [42] [20] [2]
BOLTING REQUIREMENTS
•
2 STIFFENERS PER SIDEWALL SHEET
REV. 1-25-96