Grain Systems PNEG-365 - Manual (Page 39)

39
Grain Systems, Inc. Assumption, Ill.
18' Manual Batch
6
7
8
4
Figure #45
Key Part No. Description Quantity Weight
1 LS-371 Platform Vertical Angle 2 7.59
2 TDP-5001 Handrail 27" 2 4.63
3 TDP-5003 Handrail Brace 36.29/32" 2 6.34
4 TDP-5004 Short Floor Brace 26.1/2" 3 11.85
5 TDP-5006 Platform Floor 37.7/8" 1 19.11
6 TDP-5007 Support Brace 50.21/32" 2 15.08
7 TDP-5008 Sidewall Brace 58" 2 19.65
8 TDP-5009 Platform Support 43.1/2" 2 12.95
TDP-5015 Cross Over Plat. Hdw. Pack. 1 3.95
REV. 9-30-96
3
1
5
2
CROSS OVER PLATFORM ASSEMBLY (For use with stairs)
TDP-5013
Before assembly of any platform, read the entire instructions to assure proper placement and assembly.
Refer to Figure #41 for proper location of cross over platform. Begin by assembling the cross over platform support
frame using 5/16" x 3/4" truss head bolts and nuts. When attaching platform vertical support to bin sidewall field drill
(16) 3/8" diameter holes for each support spaced every 4". Be sure and use 5/16" x 3/4" bin bolt on vertical support
to sidewall. Special attention should be taken when assembling the platform support that the support brace is placed
correctly.
Now proceed to the platform floor. Align holes on platform floor with holes on platform support and bolt together
using 5/16" x 3/4" truss head bolt and nuts. Next, assemble handrail posts, handrails, and handrail braces.